Powered by Smartsupp
sync Orbi router

What are the Tips To Sync Orbi Satellite and Router?

Orbi Satellite is a tool used to increase Wi-Fi network coverage and signal strength for Netgear’s Orbi Wi-Fi router, enabling the usage of mobile devices in larger areas, such as a spacious backyard. sync Orbi router and satellite have properly synchronized

The sync Orbi Satellite, which is not a true satellite, is located inside the Orbi network’s service region. The gadget is waterproof so that it may continue to work when placed outside. Once deployed, the gadget extends the current network’s coverage by up to 2,500 square feet. The Satellite provides a 5GHz tri-band connection with a theoretical maximum throughput of 1.7 Gbps.

More about orbi satellite and its network

The Orbi network is not a real mesh network, but rather a hub-and-spoke Wi-Fi system. Despite the fact that satellite units must presently link to the router, Netgear says it can activate a daisy chain mode that enables satellites to connect to one another, given the first Satellite is connected to an Orbi network base. Although the best mesh networks exceed Orbi and Satellite, Orbi performs well in real-world environments with obstacles. When combined with Netgear’s Orbi Pro for Small Businesses, the Orbi Outdoor Satellite may be installed both in the home and professionally, with the flexibility to divide visitors from workers.

 Tips To Sync Orbi Satellite and Router 

A question might be disturbing you: What should I do if my Orbi router and satellite are not synchronized? If your Orbi router and satellites are not synchronizing, take these procedures to sync your Orbi router with its satellites :

  • Ensure that the router and satellites are getting electricity.
  • To sync the router, press the Sync button.
  • Each satellite’s Sync button must be pressed within two minutes.
  • The position of the Sync button and the LED differs based on the satellite type.

When you push the Sync button, the satellite’s LED will illuminate in one of the following hues:

  • Solid amber. We advise positioning your Orbi router and satellite in closer proximity.
  • Solid magenta. If the LED remains solid magenta for 90-180 seconds, the router and satellite fail to synchronize.
  • Solid blue. The router and satellite have properly synchronized if the LED remains solid blue for 90 to 180 seconds.

To manually synchronize your satellite and router:

  1. Place the satellite in close proximity to the Orbi router.
  2. Connect the satellite to a source of electricity.
  3. On the rear of your Orbi satellite, the Power LED illuminates. Press the Power On/Off button if the Power LED is not lit.
  4. Wait until the bottom Light LED becomes white.
  5. During startup, the LEDs behave as follows:
  6. Pulsating in white. The satellite is now starting up.
  7. Absolute white The satellite has completed booting and is prepared to synchronize with the router.
  8. Press the Sync button on the back of your satellite, followed by the Sync button on the back of your Orbi router within two minutes.
  9. Wait for the satellite and router to synchronize.
  10. As it tries to synchronize with your sync Orbi router, the satellite’s bottom Light LED glows white. Six minutes may be required for your satellite to sync.
  11. After the bottom Light LED illuminates white, one of the following colors illuminates for about three minutes before turning off:
  12. Blue. Your Orbi router and satellite have properly synchronized, and the link between them is solid.
  13. Amber. Your Orbi router and satellite are properly synchronized, and the connection between them is good. Think about relocating the satellite closer to the router.
  14. Magenta. Your Orbi satellite and router failed to synchronize. Try again after moving the satellite closer to the router.
  15. Transfer your satellite to the open air and attach it to a power source.
  16. Note: The optimum temperature range for your satellite is 4 to 122 degrees Fahrenheit (-20 to 50 degrees Celsius).
  17. Ensure the bottom Light LED glows blue to signify a successful connection to the router.


As of now you might have read about the tips that can help you to sync the orbi Satellite Router and device to your system. This series of guides can help you to make all the hassle go away in a blink. Other than this if you need any additional information then visit the orbilogin.com official website. 

Sanchit Kaushal is the Co-Founder of Network Solution, a content creation company. He’s been a content marketer for over 5 years and writes for Tech, Entrepreneur, Inc and many other blogging and publications website strategy.